ICON Stage 7 Suspension System 2.5" 2018+ Jeep Wrangler Jl

OVERVIEW The ICON Vehicle Dynamics Stage 7 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 7 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Aluminum Series remote reservoir shocks with vehicle specific valving, tubular steel adjustable front upper links, fixed front lower links, fixed rear upper links, adjustable rear lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The Stage 7 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. FEATURES & BENEFITS 2.5" lift height Fits 35" tires (37" with optional bump stop spacer kit PN: 22029) 3" front, 2" rear increase in wheel travel Improves on and off-road ride quality over stock Dual rate coil springs with lifetime guarantee against sagging/breakage 2.5 Aluminum Series shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind 100% bolt-on system makes for an easy install “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability TECH INFO: OEM Wheels & Tires Fitment: Yes Ships In Multiple Boxes Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 4.5” Backspace / -6mm Offset Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 4.5” Backspace / -12mm Offset Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22029) APPLICATION NOTE #30: AN ADJUSTABLE TRACK BAR MAY BE NEEDED TO REALIGN THE AXLE FROM LEFT TO RIGHT, OR TO ADD ADDITIONAL STRENGTH APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE APPLICATION NOTE #66: 2 DOOR MODELS SIT SLIGHTLY HIGHER THAN 4 DOOR MODELS BUT REMAIN LEVEL WHEN INSTALLED APPLICATION NOTE #120: RECOMMENDED WHEEL AND TIRE FITMENT BASED ON JL RUBICON TRIM TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information. TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight. ICON K22017 INCLUDES THE FOLLOWING SYSTEM COMPONENTS: 27726P (QTY: 1) | 18-UP JL 2.5" REAR 2.5 VS PB PAIR 22026 (QTY: 1) | 18-UP JL 2.5" REAR DUAL RATE SPRING KIT 22021 (QTY: 1) | 18-UP JL/20-UP JT FRONT FIXED LOWER LINK KIT 22022 (QTY: 1) | 18-UP JL FRONT ADJ UPPER LINK KIT 22024 (QTY: 1) | 18-UP JL REAR FIXED UPPER LINK KIT 27821P (QTY: 1) | 18-UP JL 2.5" FRONT 2.5 VS RR PAIR 22023 (QTY: 1) | 18-UP JL REAR ADJ LOWER LINK KIT 22028 (QTY: 1) | 18-UP JL REAR ADJ TRACK BAR KIT 22027 (QTY: 1) | 18-UP JL FRONT ADJ TRACK BAR KIT 22025 (QTY: 1) | 18-UP JL 2.5" FRONT DUAL RATE SPRING KIT HOW TO INSTALL ICON STAGE 7 SUSPENSION JEEP JL 2018+: ICON SHOCKS 27821P ICON SPRINGS 22026 ICON SPRINGS 22025 ICON LOWER LINK 22021 ICON TRACK BAR 22027 ICON LOWER LINK KIT 27726P ICON LOWER LINK KIT 22023 ICON FIXED UPPER LINK KIT 22024 ICON FRONT UPPER LINK 22022 ICON SUSPENSION WARRANTY