Fabtech K1212 3″ Ball Joint UCA Lift Kit w/ Rear Performance Shocks | 2019-2025 Chevrolet Silverado 1500/GMC Sierra 1500 2WD/4WD

Features: - 3″ lift for Silverado and Sierra 1500 - Maintains smooth factory ride quality - Heavy-duty ball joints for extended travel - No suspension bind at full droop - Increased ground clearance for off-road terrain - Proper suspension geometry for easy alignment - Fits up to 33″ tall tires - Rear lift with blocks and u-bolts - Includes Fabtech performance rear shocks - Stock suspension can be restored if needed - No differential drop brackets required - Simple bolt-on installation process Take Your Silverado Or Sierra To New Heights If you want your truck to stand taller while keeping that smooth, factory-like ride, the Fabtech K1212 3″ Ball Joint UCA Lift Kit is the upgrade you need. This kit gives your Silverado or Sierra 1500 a true 3 inches of lift, which not only improves your ground clearance but also opens up the space for 33-inch tires without the rubbing you often see in smaller leveling kits. The upper control arms are engineered with heavy-duty ball joints that let the suspension travel freely, so you can push through uneven terrain without dealing with binding or harsh movement. Out back, Fabtech adds a set of performance shocks along with blocks and u-bolts, giving your truck a balanced lift that looks as good as it performs. What’s more, this system is designed to align properly, which means no endless trips to the shop trying to get it straight. For anyone who wants an aggressive stance, more capability off-road, and a dependable ride on pavement, this kit checks all the boxes. It delivers Fabtech quality at a value that makes upgrading hard to pass up. Built For Smooth Travel And Proper Suspension Geometry The Fabtech K1212 system is designed around correcting front-end suspension geometry when raising the ride height of the 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500. By lifting the truck with spacers that retain the factory coilover shocks, the kit preserves stock-like ride comfort while providing 3 full inches of height increase. The upper control arms are constructed to handle the new angles created by the lift, using extended range ball joints that allow for smooth articulation without binding at full droop. Unlike other systems that require differential drop brackets, this design works with GM’s factory suspension geometry to keep the CV axles operating correctly. In the rear, the kit uses 1.5 inch blocks, heavy-duty u-bolts, and Fabtech performance shocks to maintain a stable, even lift across the entire truck. Proper alignment is easily achieved thanks to the precision of Fabtech’s engineering, ensuring tire wear and handling remain consistent. For those who want an upgrade that is both practical and performance-minded, this suspension kit offers a reliable solution backed by proven Fabtech quality. Fits: 2019, 2020, 2021, 2022, 2023, 2024, 2025 Chevy Silverado 1500/GMC Sierra 1500 2WD/4WD Notes: - Designed for 2019-2025 Chevy Silverado 1500 and GMC Sierra 1500 - Compatible with both 2WD and 4WD models - Does not fit standard cab configurations - Not compatible with Magnetic Ride Control suspension - Will not fit GMC AT4 or Chevy Trail Boss models - Not designed for trucks equipped with Super Cruise - Factory wheels and tires cannot be reused - Supports up to 33 inch tires with proper setup - Rear lift achieved with 1.5 inch blocks and u-bolts - No differential drop brackets are necessary - Professional alignment required after installation - Aftermarket wheels with correct backspacing recommended - Some trimming may be necessary for tire clearance - Includes Fabtech rear performance shocks in the kit - California Proposition 65 label